- May 26, 2013 at 11:41 pm #43269
This is where we started, building the plenum
Filter Holders so filter changes will be easy
Test fitting filters
Controls for air make up fan so we can set the pressure positive or negative..yes they’re off a boat!
Gauge so we can accurately set the pressure
Installing the light covers
Painting the booth late at nightMay 26, 2013 at 11:51 pm #43277May 27, 2013 at 12:09 am #43285
These are pic’s after we got done putting all new seals in the doors and light fixtures
New light fixtures all sealed off to keep overspray out
This one’s just for you Jay, being you couldn’t find the pictures on facebook you goober :hunt
Rob’s remote thermometer so he doesn’t have to go in the booth to check the temperature :whistle:May 27, 2013 at 12:55 am #43286brandon dingwellParticipant
booth came out nice :cheers
you do realize that Jay doesnt have a facebook account :whistle:May 27, 2013 at 2:33 am #43288MoCokeParticipant
looks great jack. what did u use to hod the filters in place? homemade? :cheersMay 27, 2013 at 5:40 am #43290Ben HartParticipant
Nice job. Sounds like you’re much happier, than spending 100k to get a premium name brand booth installed.
What do you have for heating the booth air? What did you do for your exhaust?May 27, 2013 at 5:53 am #43291
what other than my wood furnace???? there is a tubaxle that pulls it out the pit in the floor ben an ya ding i know jay dont have a facecrack acct :pMay 27, 2013 at 6:26 am #43292CraigParticipant
Nice.. :cheers …I see you’ve ingeniously built in a rack to bleed out your deer as well as mount your filters :).May 27, 2013 at 12:27 pm #43297Malcolm WilsonParticipant
Looking good :cheersMay 27, 2013 at 2:55 pm #43299Rob van AbeelenParticipant
Nice rebuild!!May 27, 2013 at 6:30 pm #43301ChrisParticipant
I’ve just about completed an upgrade on our booth so I know the feeling when it all comes together. Looks good. :cheers
I see they still haven’t fixed the spelling error in that Aston Martin ad. :S But, who cares. 😉May 27, 2013 at 7:38 pm #43302brandon dingwellParticipant
There was writing in that ad :whistle:
I didnt notice :roflMay 27, 2013 at 9:24 pm #43303Scott BowdenParticipant
Nice booth renovation.
That is not an authentic AM adverisement. It’s controversy has been written about since it went viral. The tagline and use of models to attract consumers has been used before. The model is a Playmate. A large company such as AM and others would not allow a misspelled or incorrect word to go to print, and the use of AM’s logo is infringement. Anything can hit the ‘net.May 28, 2013 at 1:28 am #43307Charles SmithParticipant
What do you have for material in the walls?
ChuckMay 28, 2013 at 1:46 am #43308
their just sheetrock walls
- You must be logged in to reply to this topic.