Clear Preference, Gun, and Tip Size Combo

Those who like the Iwata LPH400, what paint?

solvent what gun setting do you alter for silvers Just ready to hang up my guns and WAMO my missus scrapes along the side of a freigen truck..... then the truck goes into reverse and the wheel nut lodges into the wing(fender)ripping it right off the mounts ... police guy saw everything and said it looked 50/50:cens how pissed am i left to fix this mess bmw mini in code pure silver have fixed the door tonight basicly the front qtr of the door ...new" rel="follow">what gun adjustments do you make for laying down

got tired of my cavalier

A couple of cars we did this summer

RM Onyx waterborne paint for a few months now, survived the humidity and just wanted to share how its been doing in our shop. When the reps first arrived and were showing us the ins and outs we seemed to be getting a bit more dirt then usual in the base which was slowing us down. The RM wetbed doesn't allow you to tack at all so it was making things difficult to, so we use the Glasurit version instead and being able to tack it seemes to help a bit. The humidity slo" rel="follow">RM Onyx Update

Big painted Fiberglass project

dirty pics

reducer). LPH400 1.4 tip, 16 psi at the gun, fluid out 2 turns. Thanks in advance for any helpful advice. Jim The second coat of paint is fresh in this picture. [IMG]" rel="follow">Single Stage Paint Repair Help

anyone spraying ppg's enviro base?

primer and spritz?? pics would be great too.." rel="follow">Rubbing Block's

help!! why do i keep having problems with silvers?

Qestion for the prod. painters?

Sanding ceramic clear coat

voc stuff...so its an 8821 clear going on the truck...The owner insists on Imron... I also have some SMC repairs to the inner structure of th" rel="follow">Any body work with trucks...like tractor trailers?

Solvent Please let me know how to mix it and/or when to mix it as well as the ratio and spray p" rel="follow">PPG Blending System Help

how do you get a good finish?

no pro but need some help with base coat/clear coa

stripes on new 2010 Camaro

2k red,all looked great,job needed to go out same day so i thought a good chance to test out my new lamp left it for around 20 mins then put infrared on with correct distance and left for around 10mins,come to have quick look see if all ok and had p" rel="follow">problem when baking

DELFLEET Epoxy

PPG Envirobase

Really bad paint job

primer on a plastic bumper cover? anyone try this? do i need to use adhesion promoter first?" rel="follow">poly primer on plastic

hardener to the ba" rel="follow">Anyone painted glass