Sup Everyone,

Please post down what guns you use for each specific job (ex: primer, base coats, clears).

I use:

Base coats: Iwata LPH-400 w/ 1.3 orange cap.
Clear coats: SATA Jet Digital 2000 RP w/ 1.4 cap
Primers: Non-brand name HVLP gun w/ 1.8 cap.

What about you guys?

Kudos,
Jay

Base: Iwata WB400 WBX gold cap 1.3

Clear: Iwata WB400 WB2 blue cap 1.3

Primer: Devilbiss PRi 1.8

Primer Iwata LPH440 1.6
Sealer Iwata W-400lv 1.4 or LPH-400 1.4
Basecoat Sata 3000 hvlp 1.4HC and Tekna 1.4
Clearcoat Sata 3000 RP 1.2 or 1.3(depends on weather) and sometimes Iwata W-400lv 1.3

Primer: SATAjet 100 BF HVLP 1.7
Sealer: SATAJet 3000 HVLP 1.4
Base: SATAjet 3000 HVLP Digital 1.3
Clear: SATAjet 3000 RP Digital 1.3
All guns used with 3M PPS cups.

I thinks it's obvious I am partial to SATA

Primer-Eminent compliant gun with a 1.5(made in holland)these guns are tough as sh@t,we bought 4 of them in 1987 and replaced them last year.

Sealer=Devilbiss plus with a 1.4

WB basecoat=sata 3000 hvlp with a 1.4HC

Single Stage=first gen Sata rp with a 1.4

Clear=Sata rp 3000 with a 1.4

Solvent base=Devilbiss plus with a 1.4 or first gen sata rp 1.4

*Sealer gun: sata NR 2000 1.4 *.Autowave SATA 3000,1.4 . * HS+ Clear Sata 3000 1.3. All Sata's for me Sikkens sealer,paint & Clear

polyprimer sata klc-p 2.5
primer: sata 100b hvlp 1.9
base: lph400 / orange 1.4
clear: sata 3000rp 1.4 / iwata lph400 1.4
touchup guns: lph80 1.0 / sata minijet 3000 1.0

Primer: War-Wick 878H 2.0
Base metallics: Sata NR2000 1.4
Base solids: Iwata LPH400 1.4 silver cap
Clear: Iwata LPH400 and Sata NR2000
Backup gun: Sata RP 1.4
Mini gun: Iwata LPH80 1.2 and a few CAT mini guns
Useless junk: Sharpe Finex

Primer/sealer - W400 LV2 with 1.3, 1.4 or 1.8 depending on application.
Or Devilbiss PRI 1.6
Basecoat - Iwata W400 WBX 1.3
Clearcoat - Iwata WS400 1.3 Clear
Mini gun - Iwata LPH80 1.2 E4

Poly - Devilbiss FLG3 (1.8 - 2.2 Tip)

Primer - Sharpe SGF98 1.5 Tip, Devilbiss FLG3 1.8 Tip

Sealer - Devilbiss CVI HVLP 1.4 Tip, Sharpe T1-CG 1.4 tip

Base - Sharpe SGF 98 1.4 Tip (I've tried many different base guns, and I just like the pattern on this POS.)

Clear - Iwata LPH400, Devilbiss CVI Trans-Tech 1.4, Sata RP 1.3

Worthless POS: Devilbiss Starterline. (Biggest waste of money ever.)

Primer: HD eco roller with 5/8 nap
Sealer: Whats that
Base: Solids- HD eco roller 3/8 nap
Metallic- Lowes Kobalt roller 1/8 nap
Clear: Lowes Kobalt roller 3/4 nap for 1 coat application

It shows Ding.

Primer - Sata ??? (Shop Gun) Huge Tip

Sealer - DeVilbiss GTI 1.3

Base - Sata 3000 WSB 1.3

Clear - Sata 3000 RP 1.3

gophers - 22. cal (great for jammin)

:squirrels, groundbirds, and even bear - 22. cal/ 20 gauge over under (nice overall gun)

:deer - savage 110 (good for bigger jobs)

:ducks - Remington 870 (nice wide pattern and works with water born)



All round favorite - crossbow (really quiet for night shooting)

I want a double barrel paint gun

Stone wrote:


...but could you handle a double barrel paint gun, it has a lot of kick when you pull the trigger.