Try to find yourself a good gun cleaning kit(Astro & ATD make a good kit for about $25.00),these kits have all the little brushes and picks you need to get in the little cracks and crevices of you gun.
1)Remove the air cap and fluid tip and put the in a seperate cup with a good cleanup thinner(PPG\'s DX 590, or a high grade of lacquer thinner works well). 2)Take the needle out of the gun and use a clean cloth with your cleaning solvent and wipe the needle down and put it to the side. 3)I like using a small pump up sprayer with cleaning solvent in it to blow through the neck of my gun to loosen up the material in it before I start using my brush to scrub inside the neck. 4)Flush the neck out again with cleaning solvent and put gun to the side. 5)Use the stiff edge brushes in the kit to clean inside the air cap,paying special attention to the air hole on the outside of the cap.After scrubing the cap with the brush, rinse with cleaning solvent and put to the side.Do the same thing with the fluid tip and put your gun back together.
{mosmodule module=Easyab}
This is a little more involved than just pouring thinner in your cup and blowing it out, but it will also keep your gun alot cleaner and it only takes about 10 minutes.
geez there is some donkey's in the world. Someone on a page selena is on says dairy cows are cruelly exploited every year being artificially inseminated to keep them on the milk. Pull ya head in ya ****in idiots and get your facts together before sulking on a social website.
HELLO, I was wondering if you can shed some light on my problem. I'm having some trouble spraying silver. I am use DuPont solvent base. Some time it sprays out and looks like chrome and some time it comes out coarse looking. What I'm I doing wrong?I know pressure has a lot to do with it, but I'm at a lost? Any help would be great
HELLO, I was wondering if you can shed some light on my problem. I'm having some trouble spraying silver. I am use DuPont solvent base. Some time it sprays out and looks like chrome and some time it comes out coarse looking. What I'm I doing wrong?I know pressure has a lot to do with it, but I'm at a lost? Any help would be great
Paddy and Murphy are on a cruise ship. Paddy says "It's awfully quiet on deck tonight." Murphy says, "Everyone will be watching the band." Paddy says, "There isn't a band playing tonight." Murphy says "I definitely heard some ****er say "a band on ship
Facebook
2 days ago
![1_680706662l[1]](http://www.refinishnetwork.com/images/photos/2934/50/thumb_19c6336099a7d4f25e4f4cbf.jpg){kind=avatar}
![Image287[1]](http://www.refinishnetwork.com/images/photos/2934/50/thumb_64f889948b1af2bd023803a4.jpg){kind=avatar}
![1_104792353l[1]](http://www.refinishnetwork.com/images/photos/2934/50/thumb_c862949a374511b93fd02e1d.jpg){kind=avatar}
![1_882728616l[1]](http://www.refinishnetwork.com/images/photos/2934/50/thumb_f01cbd660f58233e17c88f6b.jpg){kind=avatar}
![1_764902023l[1]](http://www.refinishnetwork.com/images/photos/2934/50/thumb_b5ce62e55b84849657f6797a.jpg){kind=avatar}
now it just has a little mouse crate engine from the general 
